Skip to main content

Chemtex’s Closed loop Microbiocide are chemical compounds which prevents biofouling in cooling tower water.



Cooling towers are an important storage area of every industry.Now these cooling towers can accumulate with various klind of microorganisms.

These microorganisms can be sulfate reducing bacteria, aerobic and anaerobic bacteria which grows from time-to-time.All these microorganisms causes fouling of the system.


Cooling Tower MicroBiocides are chemical compounds that are dosed in cooling tower water to prevent fouling of system due to microbiological growth of various bacteria.


Chemtex’s Closed loop Microbiocide surpasses the performance of other such less effective closed loop treatment chemicals (such as Nalco 7330, Nalco 77352NA etc.)

Application:

Engine Jacket, Chiller Water Circuit, Glycol Brine System, Hot Water Circuit, Engine Coolant, Process chilling and heating etc.


Major Benefits

·         Prevention of Bio-fouling of system
·         Avoid plugging of nozzles
·         Avoids MIC (Microbiologically Induced Corrosion)
·         Prevent Water Borne Diseases
·         Improve heat loss because living organisms cause rise in temperature of water
·         Chloride is not added to water by it naturally.

Contact Us

Chemtex Speciality Limited
Regd. Office :33 Brabourne Road, Kolkata 700 001,
West Bengal, India
Phone : +(91)-(33)-7111-1111 / 7111-1112
Fax : +(91)-(33)-7111-1117
Mobile : +(91)-896-111-1111

 
Labels:

Popular posts from this blog

The Role and Importance of Demulsifiers in Oil and Gas Industry

  Demulsifier helps to extract oil and purify water, which is especially important in crude oil production and wastewater treatment.   It is a substance that separates an emulsion into components and destabilizes water-in-oil emulsions. In Crude production, Water-in-oil emulsions are typically produced, owing to the presence of emulsifying agents such as surfactants, slits, fine solids, drilling mud, clay, water, and other impurities. These impurities are undesirable need to be removed which would otherwise shackle the quality of the crude.   How does It work? Demulsifier consists of two liquids that are not mixed with each other and tiny droplets of one liquid are evenly distributed throughout the volume of the other. This kind of liquid is called dispersion medium, and the droplets are called dispersed phase. During the demulsification process, a demulsifier accumulates on the surface of the droplets and groups them together.   The process of separating a...
Read more

Hybrid Organic Acid Technology (HOAT) Coolant

Optimal use of machines is directly proportional to its engine performance. What an engine does is it converts the supplied energy into its mechanical form, driving the machine to work. Engines require one-third of total heat that is generated during conversion and the rest of the heat is needed to be evacuated from the combustion chamber which would otherwise lead to engine failure. Earlier, water was preferred as an ideal coolant for quite a period of time but the problem started to arise when the temperature would become extremely high or low, to be precise temperature more than 100 ° C and below 0°C. To get rid of this problem, coolants were formulated. Coolants are categorized chemicals that increases the boiling point of the fluid and decreases the freezing point of the fluid to make it suitable for use in extreme heat and freezing conditions. Coolants are a proportionate mixture of antifreeze and solvent, mainly glycol and water. Ideally utilized as a preventive in...
Read more

How RO Antiscalant works?

  Reverse Osmosis technology provides an efficient and reliable method for purifying water for various purposes). It can remove impurities such as salts, minerals, and other contaminants as well as microbial contaminants from the Membrane. Water molecules pass through RO membranes despite dissolved solids and other contaminants being rejected by the membrane. RO membranes are basically thin, dense, and semi-permeable membranes. However, the major significant challenge in Reverse Osmosis System is Scaling. Why does it happen? The formation of scales on the RO (Reverse Osmosis) membrane is primarily caused by the presence of certain dissolved minerals and salts in feed water. Scale refers to the accumulation of mineral deposits, such as calcium carbonate, calcium sulphate, and silica which can severely impact the efficiency and the lifespan of the RO membrane. RO Membrane scaling may lead to cause ·          Excessive Energy Consumption...
Read more