Skip to main content

Chemtex manufactures RO Membrane Antiscalants for inhibition of scale fromation in RO feed water.


A membrane is a thin, film-like structure that separates two fluids. It acts as a selective barrier, allowing some particles or chemicals to pass through, but not others.
Various types of crystal growth activities occur on these membranes.RO feed water membranes are known to accumulate huge quantity of calcium sulfate scale which is very difficult to be removed.

ALKRO range of RO Antiscalants or Antifoulants are very effective for the prevention of these inorganic scales.Chemtex manufactures these RO Antiscalants or Antifoulants which surpasses the performance of other antiscalants (such as Perma-treat 191 etc. of Nalco) under stressed conditions of high pH. ALKRO antiscalants also effectively stabilizes metal ions to prevent fouling of the membrane.

Dosage:

ALKRO antiscalant or antifoulant chemical is normally fed continuously prior to the final cartridge filter. It should be injected by chemical dosing pump from a dilution tank or directly from the drum to the feed water line. The amount of antiscalant or antifoulant required to inhibit scale formation depends on the quality of feed water and size of the membrane system.

ALKRO R.O. MEMBRANE ANTISCALANTS are available in low and high pH that enables to adjust the pH of permeate water without adding acid and alkali.

The major benefits of these chemicals are
  • Scaling is prevented.
  • Reduced downtime required for periodic cleaning of membranes
  • Enhances the quality of permeate water
  • Very easily used & handled.
  • Maintains flow rate close to design and saves power.
  • Increase in productivity. 

Contact Us

Chemtex Speciality Limited
Regd. Office :33 Brabourne Road, Kolkata 700 001,West Bengal, India
Phone : +(91)-(33)-7111-1111 / 7111-1112 Fax : +(91)-(33)-7111-1117
Mobile : +(91)-896-111-1111

RO Membrane Antiscalant

 


Labels:

Popular posts from this blog

H2S – A Silent Ultimatum to Oilfields

H 2 S Scavenger Chemical – Introduction The world has witnessed a substantial increase in E&P of crude oil to meet the need for globalization, leading to drilling of ‘deemed undesirable’ sites, owing to the presence of higher concentration of acidic gases like hydrogen sulphide, carbon dioxide, etc. These hazardous gases require proper measures before disposal or scavenging. Of these, Hydrogen sulphide/ H 2 S is the most threatening one, especially in confined or ill ventilated places. The characteristic rotten egg smell makes H 2 S recognition easy even at lower concentrations. Hydrogen Sulphide is toxic, acidic and extremely corrosive at higher concentrations. Heavier than air, it is found more near base level of the working sites. Then comes its inflammability, which may cause explosive reaction with air molecules. With peroxides, ammonia and other oxidizing chemicals, H 2 S often goes through combustible reactions, ...
Read more

Acid Corrosion Inhibitor – Chemtex Speciality Limited

  Acid Corrosion Inhibitors are the most important inhibitor of any operation, preventing the impact of corrosion on exposed metal, tubular, downhole equipment, and surfaces and maximizing longevity, minimizing the operational cost. Corrosion is the chemical interaction with the environment that cause the deterioration of materials and it is unavoidable for all metals. When acids come into contact with metals, they initiate chemical reactions that lead to corrosion. Acid corrosion inhibitors work by forming a protective layer on the metal surface, which acts as a barrier against the corrosive acids. This layer prevents direct contact between the acid and the metal, thus inhibiting the corrosive process. Mechanisms of Acid Corrosion Inhibition Acid corrosion inhibitors work by forming a protective layer on the metal surface, which acts as a barrier against the corrosive acids. This layer prevents direct contact between the acid and the metal, thus inhibiting the corrosive pr...
Read more