Skip to main content

Chemtex specializes in Acid Corrosion Inhibitors which helps to prevent the corrosive action of acids on metals


Industries which are abundant in metal manufacturing & handling are known to suffer from huge corrosive action.This action is mainly due to corrosive mineral acids like hydrochloric acid, nitric acid, sulfuric acid, sulfamic acid, hydrofluoric acid, phosphoric acid etc., and organic acids such as Cirtic Acid, Oxalic Acid, Formic Acid, Tartaric Acid, EDTA etc.

So Acid CorrosiveInhibitors are widely used in such areas which acts as  rust preventatives or rust preventives (commonly termed or referred as Rodine).In theoretical knowledge these are products that are used to permit corrosion protection to metals from strong and corrosive mineral acids & organic acids as well.
Some of the applications are as follows:-


·         Acid plant cleaning (CIP)
·         Heat exchanger, boilers and equipments descaling.
·         Acid pH adjustment
·         Acid Pickling operations
·         Removal of CaCO3 in Oil Well Acidizing


Chemtex specializes in Acid Corrosion Inhibitors which helps to prevent the corrosive action of acids on metals.
These  chemical compounds can be further classified as under:-
·         HCL Acid Inhibitor (Rodine 213, Rodine 213 Special, Rodine 214, Rodine 103, Rodine 52)
·         Sulfuric Acid Corrosion Inhibitor (Rodine 130)
·         Sulfamic Acid Corrosion Inhibitor (Rodine 31A, Rodine 102)
·         Acid Pickling Corrosion Inhibitor (Rodine 85, Rodine 95, Rodine 50, Rodin 55, Rodine 130)


Contact Us

Chemtex Speciality Limited
Regd. Office :33 Brabourne Road, Kolkata 700 001,
West Bengal, India
Phone : +(91)-(33)-7111-1111 / 7111-1112
Fax : +(91)-(33)-7111-1117
Mobile : +(91)-896-111-1111


Labels:

Popular posts from this blog

The Role and Importance of Demulsifiers in Oil and Gas Industry

  Demulsifier helps to extract oil and purify water, which is especially important in crude oil production and wastewater treatment.   It is a substance that separates an emulsion into components and destabilizes water-in-oil emulsions. In Crude production, Water-in-oil emulsions are typically produced, owing to the presence of emulsifying agents such as surfactants, slits, fine solids, drilling mud, clay, water, and other impurities. These impurities are undesirable need to be removed which would otherwise shackle the quality of the crude.   How does It work? Demulsifier consists of two liquids that are not mixed with each other and tiny droplets of one liquid are evenly distributed throughout the volume of the other. This kind of liquid is called dispersion medium, and the droplets are called dispersed phase. During the demulsification process, a demulsifier accumulates on the surface of the droplets and groups them together.   The process of separating a...
Read more

Hybrid Organic Acid Technology (HOAT) Coolant

Optimal use of machines is directly proportional to its engine performance. What an engine does is it converts the supplied energy into its mechanical form, driving the machine to work. Engines require one-third of total heat that is generated during conversion and the rest of the heat is needed to be evacuated from the combustion chamber which would otherwise lead to engine failure. Earlier, water was preferred as an ideal coolant for quite a period of time but the problem started to arise when the temperature would become extremely high or low, to be precise temperature more than 100 ° C and below 0°C. To get rid of this problem, coolants were formulated. Coolants are categorized chemicals that increases the boiling point of the fluid and decreases the freezing point of the fluid to make it suitable for use in extreme heat and freezing conditions. Coolants are a proportionate mixture of antifreeze and solvent, mainly glycol and water. Ideally utilized as a preventive in...
Read more

How RO Antiscalant works?

  Reverse Osmosis technology provides an efficient and reliable method for purifying water for various purposes). It can remove impurities such as salts, minerals, and other contaminants as well as microbial contaminants from the Membrane. Water molecules pass through RO membranes despite dissolved solids and other contaminants being rejected by the membrane. RO membranes are basically thin, dense, and semi-permeable membranes. However, the major significant challenge in Reverse Osmosis System is Scaling. Why does it happen? The formation of scales on the RO (Reverse Osmosis) membrane is primarily caused by the presence of certain dissolved minerals and salts in feed water. Scale refers to the accumulation of mineral deposits, such as calcium carbonate, calcium sulphate, and silica which can severely impact the efficiency and the lifespan of the RO membrane. RO Membrane scaling may lead to cause ·          Excessive Energy Consumption...
Read more