Chemtex Speciality Limited

Optimal use of machines is directly proportional to its engine performance. What an engine does is it converts the supplied energy into its mechanical form, driving the machine to work. Engines require one-third of total heat that is generated during conversion and the rest of the heat is needed to be evacuated from the combustion chamber which would otherwise lead to engine failure. Earlier, water was preferred as an ideal coolant for quite a period of time but the problem started to arise when the temperature would become extremely high or low, to be precise temperature more than 100 ° C and below 0°C. To get rid of this problem, coolants were formulated. Coolants are categorized chemicals that increases the boiling point of the fluid and decreases the freezing point of the fluid to make it suitable for use in extreme heat and freezing conditions. Coolants are a proportionate mixture of antifreeze and solvent, mainly glycol and water. Ideally utilized as a preventive in

Antifreeze helps prevent liquid from freezing in sub-zero temperatures, and preventing boil-outs above the designated boiling point of the same so that it doesn’t evaporate. A study confirms three-fifth of all engine problems are coolant-related. For an engine to operate optimally, only one-third of generated heat/ energy is required and the rest is released or transferred. If this transfer does not take place, it would lead to overheating of engine equipment, causing breakdown and/ or failure. Overheating adversely affects the engine's efficiency directly, affecting performance, fuel economy, maintenance, and longevity of vital engine components. Using recommended coolant ensures that the engine runs at an optimum temperature without any heat-related hassles. What is coolant to begin with? Coolant, derived from antifreeze chemicals are commercial grade antifreeze chemicals used in automobiles, DG sets, heavy-duty systems, etc., protecting the engine from getting dis

Cooling process of automobiles is an important technology as it is directly or indirectly affecting the engine's performance, fuel economy, vehicle aerodynamics, passenger comfort and maintenance, and life span of other components in vehicles, etc. On account of high heat of dissipation, large radiators are now commonly found which finally results into supplementary rise in viscosity and boost the fuel consumption. Therefore, coolant serves as a crucial part of engine's system which helps to cope up with all these challenges faced by the heavy automobile industries. Coolant serves to be an important part of automobiles engine system by providing protection to the engines from freezing and to the other parts as well as components of the vehicles against corrosion. It helps to sustain the overall heat balance by effectively discarding heat energy. Thus, coolant aids in ensuring an effective performance of the engine in the near future. Generally, a good coolant m

Automobile industries are manufacturing diesel engines nowadays mostly.These engines are known for their better fuel efficiency & cost effectiveness. These engines from time to time accumulate huge sludge & mineral deposits.Infact the diesel engine can overheat naturally & also cause shutdown of the system. So to protect the cast iron diesel engine coolant corrosion inhibitor is being used.This chemical is known for some major benefits : - ·         It is combined with chemical additives that protect against sludge and mineral scale deposits. ·         It is effective against liner pitting and cavitation erosion. ·         It prevents over heating of engine and thus reducing chances of shut down.   ·         Not harmful to radiator or heater connecting hoses, diesel liner seals and ‘O’rings This product protects cooling systems against corrosion, liner pitting, cavitation-erosion, mineral scale deposits and electrolysis. Ch

A chemical reaction which corrodes the metal surface in presence of air,impurities dissolved in water is known as corrosion.The various range of reactions attributes to physical,electrochemical, physical erosion or may be from biological attack also. Corrosion has severe effects not only on metal surface but also on other factors such as:- 1.      Leakage or bursting of the system. 2.      Water/Fluid Contamination. 3.      Severe heat loss better known as power loss. So corrosion is the most imminent threat to metals which must be stopped at any cost. Industries all around the globe has given a tough competition to each other in manufacturing of corrosion inhibitors which helps to prevent corrosion. Corrosion inhibitors are the wide range of chemical compounds which helps to prevent corrosion on metal surface.Each of these compounds are designed for some unique applications.Corrosion is mainly recognized by its attack on boilers,closed lo