Skip to main content

Chemtex Speciality Limited offers wide Range of Corrosion Inhibitors for Industrial Usage


A chemical reaction which corrodes the metal surface in presence of air,impurities dissolved in water is known as corrosion.The various range of reactions attributes to physical,electrochemical, physical erosion or may be from biological attack also.



Corrosion has severe effects not only on metal surface but also on other factors such as:-
1.     Leakage or bursting of the system.
2.     Water/Fluid Contamination.
3.     Severe heat loss better known as power loss.

So corrosion is the most imminent threat to metals which must be stopped at any cost. Industries all around the globe has given a tough competition to each other in manufacturing of corrosion inhibitors which helps to prevent corrosion.



Corrosion inhibitors are the wide range of chemical compounds which helps to prevent corrosion on metal surface.Each of these compounds are designed for some unique applications.Corrosion is mainly recognized by its attack on boilers,closed loop chiller,engine coolants,cooling water tower,sodium and calcium chloride brine solution,mono ethylene brine solution.
Now all these categories can be further subdivided like as:-
·        
BOILER CORROSION


i) Uniform/General Corrosion due to high temperature 
ii) Pitting Corrosion due to high temperature and chloride 
iii) Galvanic Corrosion due to multi-metals
iv) Oxidation Corrosion due to oxygen and carbon dioxide 
v) Stress Cracking Corrosion due to high pressure and temp.

·        
COOLING WATER CORROSION


i) Uniform/General Corrosion due to high temperature 
ii) Pitting Corrosion due to high chlorine and bromine 
iii) Galvanic Corrosion due to multi-metals 
iv) MIC (Microbiologically Induced Corrosion) 
v) Erosion Corrosion due to fast flowing fluid with abrasives.

·        
CLOSED CIRCUIT SYSTEM CORROSION  for Hot/Chilled Water System:- 
i) Oxidation Corrosion due to oxygen and air entrapment 
ii) MIC (Microbiologically Induced Corrosion)
iii) Erosion Corrosion due to fast flowing fluid with abrasives
for Glycol Brine / Methanol Brine System:- 
iv) Pitting and Uniform Corrosion due to formation of acids
for Calcium Chloride and Sodium Chloride Brine System:-
v) Pitting Corrosion due to high chlorine and bromine.

Our company Chemtex Speciality Limited has mastered in corrosion inhibitors since past three decades.These chemical compounds are better known for their cost effective,highly productive nature.The various registered trade names under these prodect category are ALSTACOOL, ALSTHERM, PROTODIN, THEODIN for:-

Contact Us

Chemtex Speciality Limited
Regd. Office :33 Brabourne Road, Kolkata 700 001,West Bengal, India
Phone : +(91)-(33)-7111-1111 / 7111-1112 Fax : +(91)-(33)-7111-1117
Mobile : +(91)-896-111-1111


Labels:

Popular posts from this blog

TONO FROST 593: The Ultimate NSF-Certified Solution for Food & Beverage Heat Transfer

In the world of food and beverage processing, maintaining thermal efficiency, ensuring product safety, and minimizing operational downtime are all non-negotiable demands. Whether it’s for cold storage, chilling equipment, pasteurization lines, or fermentation control, the choice of heat transfer fluid can significantly impact both performance and compliance. TONO FROST 593 , developed by Chemtex, is an NSF HT1-certified inhibited propylene glycol solution engineered to meet the highest standards of safety, performance, and efficiency in food-grade environments. What is TONO FROST 593 ? TONO FROST 593 is a blend of food-grade propylene glycol and a corrosion inhibitor package designed to provide: Long-lasting protection against rust, scale, and corrosion Stable thermal conductivity Wide temperature operability Food safety compliance for indirect contact In a market flooded with products, NSF certification stands as illumination of reliability and trust. Unlike many pre-inhibited glyco...
Read more

Acid Coil Cleaner leaves the aluminum surface clean and shining bright

Improper refrigerant levels, dirty coils, and worn out compressors or condensers can result in inefficient performance of air conditioning system. An inefficient system tends to force the compressor to work harder than is required decreasing its life span and thereby leading to higher energy bills. The primary energy required in operating an air conditioning system comes from the compression of refrigerant. The hotter the compressor receives the processed refrigerant, the more energy is necessary to force it through the condenser. The refrigerant needs to become cold enough to absorb more heat from the process, therefore an external chiller such as an open evaporative condenser or air blast unit is required. It is crucial for effective air-conditioning operation that the condenser is able to easily reject heat through the cooling airflow and the heat exchanger coils. Energy consumption builds up as the refrigerant vapor pressure increases, where the refrigerant is not sufficien...
Read more

Hybrid Organic Acid Technology (HOAT) Coolant

Optimal use of machines is directly proportional to its engine performance. What an engine does is it converts the supplied energy into its mechanical form, driving the machine to work. Engines require one-third of total heat that is generated during conversion and the rest of the heat is needed to be evacuated from the combustion chamber which would otherwise lead to engine failure. Earlier, water was preferred as an ideal coolant for quite a period of time but the problem started to arise when the temperature would become extremely high or low, to be precise temperature more than 100 ° C and below 0°C. To get rid of this problem, coolants were formulated. Coolants are categorized chemicals that increases the boiling point of the fluid and decreases the freezing point of the fluid to make it suitable for use in extreme heat and freezing conditions. Coolants are a proportionate mixture of antifreeze and solvent, mainly glycol and water. Ideally utilized as a preventive in...
Read more