Skip to main content

Optimize Your Boiler, Chiller, and Condenser Performance with powerful Descaling Chemicals

 Industrial equipment like boilers, chillers, and condensers are important for any commercial system. To prevent heat exchangers, chillers, and condensers from scaling is important to get optimal performance. However, over time, these essential components can suffer from a build-up of scale and mineral deposits, leading to reduced performance, increased energy consumption, and even equipment failure.

The numerous components enter this equipment with feed water as feed water contains dissolved solids and impurities, salts, etc. If it gets overlooked, the scale gets hardened due to continuous heating of the boiler.

Characteristics of most common deposits

•Carbonate deposits, large granules, and porous forms dense and uniform pitting and scaling over the surface

•Sulphate deposits, crystalline, fine particles but a bit harder and denser than a regular carbonate deposit

•Hard and not so easy to remove silica deposits, extremely small, forms a dense and impervious scaling

•Iron deposits

How does Descaling chemical help?

Descaling chemicals act as powerful agents that effectively removes scale and mineral deposits from the internal surfaces of boilers, chillers, and condensers system. Using these descaling chemicals regularly ensures the protection of the system metallurgy, providing a long service life for the boiler system. This formulation eliminates mineral scales, metal oxides, sludge, and other deposition, prevents corrosion caused by oxidation, and maintains pH, these benefits not only optimize operational performance but also contribute to a more sustainable and cost-effective operation. 



Selecting the most suitable one for your specific requirement is important for your system. This formulation not only optimizes operational performance but also contributes to a more sustainable and cost-effective solution.     

With numerous descaling chemical options available in the market, selecting the most suitable one for your specific application can be daunting. We will provide insights into key factors to consider when choosing a descaling chemical, such as compatibility with different materials, environmental considerations, and industry regulations. This information will help you make an informed decision and select the most effective product for your system. The need for descaling chemical cleaning during the life of equipment has become a recognized fact & should be accepted as a maintenance practice. 

We, Chemtex Speciality Limited specialize in providing high-quality descaling chemicals for boilers, chillers, and condensers. Our range of descaling chemicals is specifically formulated to address to meet your specific requirement.

Chemclean 05 – Sulfamic acid-based descaling chemical to prevent fouling in Boiler

Chemclean 06 – Sodium hydroxide and Phosphate based descaling chemical for removing silica & organic deposits from the water side of the boiler. 

Chemclean 01 – Sodium Hydroxide and Phosphate based descaling chemical effectively removes organic foulant, oil, and grease from the boiler.

Alstascale OD40/DS10 -Online desclant or rust remover for new or old CHW line carrying chiller water, glycol antifreeze, or calcium chloride brine.

Alstascale DS85 – Heavy-duty liquid descaling formulation for hard water scales with high silica or silicate deposits.

Visit our website to explore our range of descaling chemicals that can help optimize the performance and extend the lifespan of your equipment.

https://www.chemtexltd.com/products-and-solutions/cleaning-and-disinfectant-chemicals/speciality-industrial-cleaning/

Popular posts from this blog

Hybrid Organic Acid Technology (HOAT) Coolant

Optimal use of machines is directly proportional to its engine performance. What an engine does is it converts the supplied energy into its mechanical form, driving the machine to work. Engines require one-third of total heat that is generated during conversion and the rest of the heat is needed to be evacuated from the combustion chamber which would otherwise lead to engine failure. Earlier, water was preferred as an ideal coolant for quite a period of time but the problem started to arise when the temperature would become extremely high or low, to be precise temperature more than 100 ° C and below 0°C. To get rid of this problem, coolants were formulated. Coolants are categorized chemicals that increases the boiling point of the fluid and decreases the freezing point of the fluid to make it suitable for use in extreme heat and freezing conditions. Coolants are a proportionate mixture of antifreeze and solvent, mainly glycol and water. Ideally utilized as a preventive in...

How RO Antiscalant works?

  Reverse Osmosis technology provides an efficient and reliable method for purifying water for various purposes). It can remove impurities such as salts, minerals, and other contaminants as well as microbial contaminants from the Membrane. Water molecules pass through RO membranes despite dissolved solids and other contaminants being rejected by the membrane. RO membranes are basically thin, dense, and semi-permeable membranes. However, the major significant challenge in Reverse Osmosis System is Scaling. Why does it happen? The formation of scales on the RO (Reverse Osmosis) membrane is primarily caused by the presence of certain dissolved minerals and salts in feed water. Scale refers to the accumulation of mineral deposits, such as calcium carbonate, calcium sulphate, and silica which can severely impact the efficiency and the lifespan of the RO membrane. RO Membrane scaling may lead to cause ·          Excessive Energy Consumption...
Midstream – Oil and Gas Chemicals Once petroleum products are recovered in the upstream sector, they move into the midstream sector of the petrochemical industry. What is Midstream? Midstream as the name suggests sits right between the exploration and refining sections of the petrochemical industry. The midstream sector focuses on the transportation and storage of natural gas and crude oils through various oil channels, pipelines, and oil tankers, etc. It is a hub connecting the various stages of the oilfield industry, allowing oil, natural gas, and produced water to travel from the wellhead to its final destination, and in between. This sector involves extensive installation of pipelines, transmission lines, and machinery, which signifies the requirement of long service life and reliability. To meet these standards, efficient chemicals are crucial to make midstream processes as efficient and smooth as possible. Regardless of the mode of transportation, the vast medium infrastructure...