Skip to main content

Chemtex manufactures stabilized Silver Hydrogen Peroxide is formulated for use in circulation cleaning and sanitizing of industrial equipments

It is a mixture of hydrogen peroxide with colloidal silver. 

Silver peroxide is an oxidizing chemical which have its uses in many applications. These chemical have some distinguishing properties such as no-rinse, odorless, non-foaming, non-tainting, non-toxic and non-staining formula and is very able to sanitize at cold temperature.

Usages

Silver Hydrogen Peroxide are circulation cleaning and sanitizing of industrial equipments such as tanks, pipelines, aseptic equipment, evaporators, fillers, pasteurizers and for sanitizing of previously cleaned, hard, non-porous food contact surfaces and equipments.

Silver Hydrogen Peroxide liquid sanitizer is also approved for immersion cleaning of equipment and utensils for food processing and packaging plants and eating establishments. Silver synergized Hydrogen Peroxide is used at low solution concentration to rapidly kill a broad spectrum of microorganisms including gram-positive and gram-negative bacteria. It is more tolerant than most sanitizers to pH, temperature, water hardness and organic soils. In summary, These chemical is also very much economical &  very much environment friendly.

Chemtex manufactures stabilized silver hydrogen peroxide which surpasses the performance of other Silver impregnated hydrogen peroxide based sanitizers (such as Divosan Activ of Johnson Diversey and P3 Oxonia Active of Ecolab).

Dosage:

It Is highly recommended for use on pre-cleaned surfaces such as equipments, pipelines, tanks, vats, filters, evaporators, pasteurizers and aseptic equipments in dairies, breweries, wineries, beverage and food processing/ packaging plants and egg processing and packaging equipment surfaces. The dosage depends on applications, ranging from 0.5% to 5% v/v. The specific dosage rates and method will be specified by the CSL technical representative.

Major Benefits:
·         
  •       Performs effectively at low temperature and low concentrations to disperse bio-film and     inhibit the formation bacteria, fungus and molds
  • ·         Does not require multi-biocides as micro-organisms cannot produce immunity.
  • ·         Will not oxidize organic scale and corrosion inhibitor.
  • ·         Does not add conductivity (TDS).
  • ·         Does not require agitation or RPM. Breaks down into carbon dioxide and water.

Popular posts from this blog

Hybrid Organic Acid Technology (HOAT) Coolant

Optimal use of machines is directly proportional to its engine performance. What an engine does is it converts the supplied energy into its mechanical form, driving the machine to work. Engines require one-third of total heat that is generated during conversion and the rest of the heat is needed to be evacuated from the combustion chamber which would otherwise lead to engine failure. Earlier, water was preferred as an ideal coolant for quite a period of time but the problem started to arise when the temperature would become extremely high or low, to be precise temperature more than 100 ° C and below 0°C. To get rid of this problem, coolants were formulated. Coolants are categorized chemicals that increases the boiling point of the fluid and decreases the freezing point of the fluid to make it suitable for use in extreme heat and freezing conditions. Coolants are a proportionate mixture of antifreeze and solvent, mainly glycol and water. Ideally utilized as a preventive in...
Read more

How RO Antiscalant works?

  Reverse Osmosis technology provides an efficient and reliable method for purifying water for various purposes). It can remove impurities such as salts, minerals, and other contaminants as well as microbial contaminants from the Membrane. Water molecules pass through RO membranes despite dissolved solids and other contaminants being rejected by the membrane. RO membranes are basically thin, dense, and semi-permeable membranes. However, the major significant challenge in Reverse Osmosis System is Scaling. Why does it happen? The formation of scales on the RO (Reverse Osmosis) membrane is primarily caused by the presence of certain dissolved minerals and salts in feed water. Scale refers to the accumulation of mineral deposits, such as calcium carbonate, calcium sulphate, and silica which can severely impact the efficiency and the lifespan of the RO membrane. RO Membrane scaling may lead to cause ·          Excessive Energy Consumption...
Read more

Excellent Efficiency Flocculation with Polyelectrolyte

Polyelectrolytes are regarded as polymer chains with an electrolyte group on every repeat unit. When dissolved in a polar solvent, these polymers are charged due to dissociation of small counter ions that leave behind a charged macro ion. Polyelectrolytes include biologically important molecules such as polypeptides and DNA. These are referred to as polymers that are generally used for water purification. These are highly noted for their beneficiary nature of handling problems of slow settling of flocs in water at low temperature, treating soft colored water where they increase toughness of the flocs and enhance its settlement ability. Polyelectrolytes are formulated in a way so as to be used as coagulants and flocculants as well as a sludge dewatering agent in the waste water treatment plants. P olyelectrolyte , thereby, plays an indispensable part in the sludge conditioner formulation. Generally flocculation occurs owing to charges present on the particles. Generally, Pol...
Read more