Chemtex manufactures Iodophore which is a very effective and food grade disinfectant for F&B industry such as dairy, ice cream, brewery, food processing, meat processing and beverages etc.

Iodophore or commonly referred as Iodophor is a preparation containing iodine complexed with a solubilizing agent, such as a surfactant or povidone (forming povidone-iodine). The result is a water soluble material that releases free iodine when in solution. Iodophors are prepared by mixing iodine with the solubilizing agent; heat can be used to speed up the reaction.

Application:
For disinfection in various industry related to the F&B sector.

Dosage:
It is often supplied in different concentrations and is further diluted with water before use. The label will advise the appropriate dilution rate, commonly 1:1000 or 1:100. Equipment to be sanitized should be thoroughly clean and left in contact with the solution for at least 2 minutes. Diluted iodophor is also used extensively in the dairy industry.

Major Benefits

Non-Toxic Disinfection.

Test

H2S – A Silent Ultimatum to Oilfields

H 2 S Scavenger Chemical – Introduction The world has witnessed a substantial increase in E&P of crude oil to meet the need for globalization, leading to drilling of ‘deemed undesirable’ sites, owing to the presence of higher concentration of acidic gases like hydrogen sulphide, carbon dioxide, etc. These hazardous gases require proper measures before disposal or scavenging. Of these, Hydrogen sulphide/ H 2 S is the most threatening one, especially in confined or ill ventilated places. The characteristic rotten egg smell makes H 2 S recognition easy even at lower concentrations. Hydrogen Sulphide is toxic, acidic and extremely corrosive at higher concentrations. Heavier than air, it is found more near base level of the working sites. Then comes its inflammability, which may cause explosive reaction with air molecules. With peroxides, ammonia and other oxidizing chemicals, H 2 S often goes through combustible reactions, ...

Acid Corrosion Inhibitor – Chemtex Speciality Limited

Acid Corrosion Inhibitors are the most important inhibitor of any operation, preventing the impact of corrosion on exposed metal, tubular, downhole equipment, and surfaces and maximizing longevity, minimizing the operational cost. Corrosion is the chemical interaction with the environment that cause the deterioration of materials and it is unavoidable for all metals. When acids come into contact with metals, they initiate chemical reactions that lead to corrosion. Acid corrosion inhibitors work by forming a protective layer on the metal surface, which acts as a barrier against the corrosive acids. This layer prevents direct contact between the acid and the metal, thus inhibiting the corrosive process. Mechanisms of Acid Corrosion Inhibition Acid corrosion inhibitors work by forming a protective layer on the metal surface, which acts as a barrier against the corrosive acids. This layer prevents direct contact between the acid and the metal, thus inhibiting the corrosive pr...

Chemtex Speciality Limited

Search This Blog