Skip to main content

Chemtex Methanol Brine Corrosion Inhibitor is a multi-metal corrosion inhibitor developed to protect system metal from corrosion



Diesel Engine radiators are made up of metals.These metals can get aggravated with corrosion from time to time.This type of corrosion cam mainly happen because of methanol as well of oxygen which gets introduced with it.

Chemtex manufactures methanol brine corrosion inhibitor which helps to prevent this type of corrosion single handedly.It is also effective against hydrogen sulfide (H2S) and Carbon dioxide (CO2) corrosion.

Hydrogen sulfide reacts directly with iron to form iron sulfide, the reaction is:-
  • H2S + Fe -> FeS + H2

Secondly, carbon dioxide dissolves in water to form H2CO3 which reacts directly with iron to form FeCO3, the reaction is:-
  • H2CO3 + Fe -> FeCO3 + H2
The types of corrosion experienced by the metal in Methanol Brine System are Pitting corrosion- caused due to formation of acids in presence of Carbon dioxide and Oxidation corrosion- caused due to reaction of metal with oxygen or air.
Chemtex methanol corrosion inhibitor helps us to prevent the following consequences:-
1.   Leakage or burst in PHEs and tubes due to corrosion.
2.   Plugging and clogging of tubes with rust flakes and reduced  flow rate
3.    Reduced heat transfer.
4.    Fouling of methanol.
Major Benefits :
  • It causes zero loss or negligible damage to metals.
  • Excellent heat transferability and flow rate
  • It keeps safe the anti-freezing property of methanol.





 

 

 

 

 

 

Contact Us

Chemtex Speciality Limited Regd. Office :33 Brabourne Road, Kolkata 700 001,
West Bengal, India Phone : +(91)-(33)-7111-1111 / 7111-1112 Fax : +(91)-(33)-7111-1117 Mobile : +(91)-896-111-1111

Labels

Labels:

Popular posts from this blog

H2S – A Silent Ultimatum to Oilfields

H 2 S Scavenger Chemical – Introduction The world has witnessed a substantial increase in E&P of crude oil to meet the need for globalization, leading to drilling of ‘deemed undesirable’ sites, owing to the presence of higher concentration of acidic gases like hydrogen sulphide, carbon dioxide, etc. These hazardous gases require proper measures before disposal or scavenging. Of these, Hydrogen sulphide/ H 2 S is the most threatening one, especially in confined or ill ventilated places. The characteristic rotten egg smell makes H 2 S recognition easy even at lower concentrations. Hydrogen Sulphide is toxic, acidic and extremely corrosive at higher concentrations. Heavier than air, it is found more near base level of the working sites. Then comes its inflammability, which may cause explosive reaction with air molecules. With peroxides, ammonia and other oxidizing chemicals, H 2 S often goes through combustible reactions, ...
Read more

Enhance IAQ of Closed Spaces with Air Fumigation: ALSTASAN SILVOX 150 FUME

Chemists around the world have shown considerable interest in various aspects and working of Hydrogen Peroxide as a disinfectant at different concentration. Over the past few years, it has been observed by them that a mere 0.5% of Hydrogen Peroxide shows excellent antiviral property within 60 seconds of application, reason being a strong oxidizing agent which helps in eliminating harmful microorganisms wherever used. It oxidizes the cell molecules, rupturing its whole structure and deactivating its ability to replicate. With silver, it has relatively wider range of biocidal (anti-bacterial and anti-fungal) pursuits than other disinfecting chemicals. Since Hydrogen Peroxide is a strong oxidizing agent and silver shows excellent anti-microbial property, their chemical combination brings a lot to the table as a rapid yet effective disinfecting agent with limited or rather no toxicity. Taking the above ideas into consideration, We at Chemtex Speciality Limited have come up with a brand n...
Read more